watch DVD about 'Nonmagnetic Stylus'

click here to contact us

Tool Setter enables to measure a tool length 'on a machining center' easily. No need to input the recode manually. Using Tool Setter reduces working time and avoids input error. ※In case you measure a workpiece which blocks electricity by using NS Tool Setter, it is required to use the Magnet Cable together.

Specifications

NS Tool Setter is available for iron and nonferrous metal, Tool Setter-i enables to measure workpieces which block electricity.

Conductivity Model MG Dimensions Battery Measurable
Tool Size
【OK】
iron,
nonferrous
metal		 M-50 ♦ φ50×50mm±0.001mm 2 Lithium batteries
[CR-2032]		 φ6mm～
S-50
S-100 φ50×100mm±0.001mm
【NO】
plascic,
wood		 i-50 ♦ φ40×50mm+0～0.005mm 2 silver oxide
batteries [SR44]		 φ0.03～6mm
Magnet Cable ♦ Cable Length: 50cm

*MG: Magnets are attached at the bottom of Tool Setter.

In case the tool diameter is larger than φ6mm and the workpiece blocks electricity, 'Magnet Cable' is a MUST with NS Tool Setter! It's easy to use; Put a magnet on NS Tool Setter and the other on the shank of measuring instrument.

Dimensions

Dimensions of Tool Setter series

print out features, measuring method, specifications and dimensions of Tool Setter series.